RV Roof Coating and Basic Maintenance Tips

RV owners need to take proper care of their RV if they expect it to last a long time and to stay in great shape. You love the RV and you rely on it for your vacations and when you are traveling around the county. With proper care and maintenance, it means that the RV is going to last you for many years to come. The following are some important tips for the RV roof coating and simple maintenance tips that you will want to follow to keep your RV in great shape.

Inspection of the Roof

You should make sure that you are inspecting the roof several times a year – twice at a minimum. This will help you find any potential problems as early as possible before they get to become too expensive to repair. You need to be sure that you are closely inspecting all of the components of the roof. This includes getting up close to look for any cracks or holes that might be in the roof. It also requires that you look around the edges of vents, skylights, and similar areas.

Those areas are where holes have been cut in the roof by the manufacturer. Even though they have been sealed and likely have caulking around them, they are not impervious to problems. You might find that you need to replace the caulk to prevent water from entering the RV.

Inspect Inside the RV

It is also quite important that you look inside of the RV for any potential signs of leaks. The roof might not show any obvious signs of a leak from the top, but that doesn’t mean that water can’t still find its way inside. You will want to look around the edges of the walls where they meet the ceiling, around the skylight, and inside of the cabinets to see if you can spot any water staining, bubbling, or other issues that would indicate that you have a leak in the RV. If you do, then you are going to want to get back on the roof and look for issues, and you will certainly want to add an RV roof coating, which we will discuss later.

Regular Removal of Debris

All manner of debris can find its way onto the top of your roof. Whether it is fallen leaves, sap from trees, rocks, or branches, you need to take the time to remove them from your roof. Check out the roof regularly and sweep away any of the debris that you happen to find.

Cleaning the Roof

The roof should be cleaned thoroughly at least three or four times each year. By keeping the roof clean, it will ensure that sap, dirt, and other debris are not degrading the roof. It will also help to prevent staining, which can come from a buildup of mold, sap, and debris that is on the roof.

You can start by rinsing the roof with water to remove dirt, and then use a brush to scrub away the grit and grime, along with the sap that may have accumulated on the roof. You will want to use a specialized roof cleaner to make sure it is properly cleaned, and then rinse it with clean water.

Add RV Roof Coating

One of the best ways to maintain your roof, and to deal with any small leaks that you might have, is to add RV roof coating. It goes on very easily – much like paint – and it will provide waterproofing protection immediately. It will cure within a few days, and it can provide your roof with protection for years to come.

How to Clean and Prevent Mold on RV Roofs

Many RV owners have issues with mold on the roof. Here you will learn how to DIY RV roof repair and clean existing mold away and how to help prevent it from forming in the future.

Steps for Cleaning:

It is important to keep your safety in mind whenever you are working on the roof of your RV. You could be seriously injured if you slipped and fell off the side. Always wear rubber-soled shoes that provide maximum traction when you are working. Be aware of anything that could cause you to trip.

The first steps are to sweep away any loose debris and then wash the roof as you normally would. There are cleansers made specifically for cleaning RVs. Once everything but the mold is rinsed away, climb back down and mix up your mold remover.

You will need one cup of household bleach mixed with one gallon of water. Fill a large spray bottle with the mixture and climb back up on the roof. Spray any areas where you see mold, mildew or other stains. Allow the solution to set for 15 minutes.

After the solution has dried, take a soft scrub brush and wet it with the same bleach solution. Scrub away at the stains. It may be necessary to spray the areas again if they are resistant to your scrubbing, and allow the solution to set again. Once you have removed all of the mold, rinse the area completely with clear water.

Preventative Maintenance:

Mold grows in moist, dark and warm environments. Keeping your roof dry is the best way to prevent mold from growing. This typically means covering the vehicle whenever it is in storage.

Some covers are not resistant to wind. During a windy rainstorm, water can get up under the cover and settle on the roof. The sun comes out and dries up the water but also gives mold spores what they need to grow. Ideally, we would all have garages large enough to park our RVs indoors, but many of us do not.

Another solution is a water and weather resistant coating. There are a variety of these coatings like Liquid EPDM Coatings, Liquid Roof, Liquid Rubber Coatings, on the market. If you are the do-it-yourself type, you can apply the coating on a sunny weekend.

While the coatings may seem expensive at first glance, once you think about how difficult it was to remove the mold and mildew, you will see the advantage. RV stores sell the RV leaks repair coatings but you may get a better price at if you order online with http://www.epdmcoatings.com/.