Tips for Caring for and Maintaining RV Roof Coatings

RV roof coatings e.g. (Liquid RV Roof) offer many benefits, including cost-effectiveness, durability, weather tightness, and more. However, they can suffer from aging-related issues over time. The answer to these potential problems is to care for and maintain your RV coatings correctly. Not sure how to do that? We’ll walk you through what you should know below.

Visual Inspection

Several times per year, you need to visually inspect roof coatings for signs of damage. This is particularly true for RVs that are stored outside without any protection overhead. What signs should you look for that might indicate there is damage that must be addressed? Here’s a quick rundown:

  • Ponding Water: This indicates that there is a low spot in the roof that is allowing water to collect. You will need to address this for the roof’s structural integrity.
  • Swelling: If you see areas of the roof that seem to have swollen, this is a sign that water has penetrated the underlying substrate and caused it to swell up. It may also be a sign that a petroleum distillate was used by a previous owner and has caused damage to the rubber roof.
  • Signs of Water Leaks Inside: If you notice dark stains on the ceiling or walls inside, this is a sure sign that the roof has been damaged in some way and water is leaking through/under the membrane.

Washing and Cleaning

While RV roof coatings are incredibly resistant to weathering and very strong, they do require regular cleaning. Our recommendations are to create a bi-annual cleaning program to help ensure that you’re taking the best care of your roof possible. What do you need to do? It’s not actually all that difficult. Here are the things to know:

  • Pick Up: Before you do anything, pick up any large debris, such as branches and sticks, pinecones, and other items that might scratch or damage the roof.
  • Sweep It: Use a soft bristled brush to sweep the debris, dust, and dirt off your roof.
  • Start at the Right Point: If your roof is flat, you can begin at any point you like. If your roof has peaks, sweep downward from them.
  • Motion: Use a side-to-side motion when sweeping your roof.
  • Check the Gutters: While you’re on the roof, make sure you check and clean your gutters out. Leaves, twigs, pinecones and needles – these are just a few of the things that can build up in your gutters, weighing them down and slowing the movement of water.
  • Water and Soap: Once you’ve swept your roof, you can then prepare to wash it. You’ll need a bucket of warm water and some gentle dish soap. Do not use harsh cleaners or you may damage rubber roof coatings.
  • The Brush: You need to use a soft bristled brush to clean your roof. Never use stiff bristled brushes or scouring pads, as these can damage the roof.
  • Washing: Gently wash the roof, scrubbing away dirt, mold, and mildew. Use smooth, circular motions to ensure you cover the entire area well.
  • Protect: Once you’ve cleaned the roof coatings, it may be wise to apply a protectant. This can help prevent staining, and it helps prevent visible edges from becoming unsightly. Make sure that any protectant you apply is rated specifically for use with EPDM, though.


In the end, RV roof coatings are actually quite easy to care for. You just need to take a proactive stance to ensure that your roof looks great, but is also protected from potential damage. A few minutes spent inspecting and cleaning your roof two to four times per year can provide a major return on your investment.

Tips for Success When Sealing Your Camper Roof

A camper rubber roof sealer is a great addition to any RV, but only when it is used and installed correctly. If you are looking into a sealant to add extra protection to your roof seams and fixtures, there is no shortage of products on the market that you can use. However, the process is generally more important than the product. For that reason, here are some tips to help you succeed with all kinds of camper sealing jobs.

Inspect the Situation

The first thing that you need to do is inspect your RV roof. Bring a marker and a camera so that you can make notes and have images to reference when applying the rubber roof sealant that you have chosen. You don’t need to mark obvious cracks or leaks, but small fractures in seals or tears in the roof should be clearly noted so that you can find them again when you come back to do the repairs. If you have recently installed a roof and are applying a camper rubber roof sealer for the first time, this step isn’t necessary.

Prepare Yourself

Once you have identified the problems or the type of sealing job you are facing, you can gather your materials. You will need a putty knife or a utility knife to scrape off old sealant, sandpaper or another abrasive material to sand off all the excess and create a smooth surface, and paper towels to wipe up the debris. If you are using a caulk-style sealant, you will also need a caulking gun. It will be in your best interest to bring pliers and a couple of wrenches so that you can access vent fans and other fixtures to touch up their sealant correctly.

Prepare the Area

Now that you’re ready, you can get the roof ready for the repair or sealing. If you are replacing old sealant, you will need to completely remove all of the damaged material from the roof. You can use mineral spirits to assist in removing all of the adhesive residue. Sandpaper will also help in removal, and in creating a smooth surface for the new application.

If you are applying sealant to a new roof for the first time, you simply need to clean the area and make sure that it is dry prior to application. Also, wait until the roof has set, in the case of liquid rubber roofing, so that you can ensure that you get a watertight seal when you apply camper rubber roof sealer.

Prevent Water Damage

The main goal of any camper rubber roof sealer is to prevent water damage and leaks in your RV. Of course, the roof is designed to protect the entire vehicle, but the majority of RV owners that report roofing issues are dealing with leaks and water damage. Make sure that you apply the sealer liberally and carefully to all seams, joints, and fixture flanges to protect the roof and all of its attachments from the elements. Sealants are usually less than $20 a tube, and can save you thousands of dollars in expensive repairs and replacements that result from leaky RV roofing materials.

Know Your Roofing Material

Finally, the most helpful thing that you can do for your roof sealing job is to know the roof material that you are working with. This includes knowing which sealants to use and how often they need reapplied. Even though rubber roofs require less maintenance than other materials, they do still require a little attention. Keep this information in mind to get the best results with sealing your camper roof.

The Importance of an RV Liquid Roof Coating

Everyone That Owns an RV Needs to Protect the Roof

You normally won’t hear two neighbors having a lively discussion about an RV liquid roof coating, unless they are both RV owners. Every owner has a favorite product and method that they use to keep the roof of their coach looking like new. And every old-timer has a horror story about a roof defect that went unnoticed and caused extensive damage to the unit’s interior. That’s why all experienced RV owners inspect their camper roofs at regular intervals and repair any defects, no matter how small, immediately.

RV liquid Roof Coatings

RV liquid Roof Coatings

Why Choose an RV Liquid Roof Coating?

When it comes to protecting the roof of an RV, there are a lot of products to choose from, each claiming to have the answers to all of your problems. They can’t all be right, so an educated RV owner needs to do some homework. You’ll certainly want the coating to be durable; after all, resurfacing your RV roof isn’t something that you’re going to want to do very often. Even if you do the work yourself, the job is time and labor intensive and there is some cost involved. That’s why more and more RV owners are coating their existing roofs with an RV liquid roof coating made from EPDM, which is a synthetic rubber. That’s because EPDM rubber coatings have been proven to withstand both hot and cold temperature extremes, thus improving a roof’s insulating ability. Liquid EPDM remains flexible, which is extremely important when coating the roof of an RV that is always in motion. Best of all, a liquid rubber roof can be applied to almost any original equipment roof material, although some may require a coat of primer first. Check with the RV liquid roof coating manufacturer to see if your roof requires a primer before applying a liquid EPDM coating and if it does, have them recommend one.

What to Look for When Choosing an RV Liquid Roof Coating.

Of course cost is always a consideration, but be careful not to let it be the main one. You’re not saving money in the long run if you have to resurface the RV roof again in three years, instead of five or ten years. That doesn’t mean that the most expensive coating is necessarily the best either. Again, do your homework. Some coating brands require special cleaners and primers; that’s an expense. Others require two coats with hours of waiting time between each coat; that could end up costing you twice as much money and time. Check their warranties; if someone is offering a lifetime warranty, be a little skeptical. Anyone who’s owned an RV for any length of time can tell you that there’s no such thing as a roof coating that lasts forever. They probably have unreasonable maintenance requirements and loopholes that protect them from ever having to deliver on their promises. A good product will be one that is made from genuine EPDM rubber and that will work on most roof surfaces; again, a primer may still be required. Look for one that will provide an excellent seal with just one coat; why waste half a day waiting for a first coat to dry or pay again for a second coat. Besides, if their product can’t give your roof adequate protection in one coat, what’s to say that it can provide protection in two coats? Would you ever buy an interior wall paint that told you right off the bat that it couldn’t cover in one coat?

Is Liquid Roof the Right Repair Product for Your RV?

Over time, your RV is subject to aging and deterioration. That’s evident over the entire vehicle, from the engine and transmission to the seals around the windows. However, nowhere is it more apparent and dangerous than with the roof. The roof is one of the most critical components of your RV’s body, and failure can cause catastrophic damage. Keeping it in good condition is vital, but are liquid roof applications the right option for you?

Why Liquid Roof Coatings?

Why should you consider going with a liquid roof coating product for your RV? It’s simple – your roof is most likely made from EPDM, which is a type of rubber. It offers quite a few benefits, including strength, UV resistance, durability and low weight.

However, it does dry and become brittle over time. If left unaddressed, this can lead to serious damage, including water leaks and even complete roof failure in serious instances. You can avoid this by refreshing the surface of your roof periodically with a liquid roof product.

There are quite a few reasons to choose a liquid application rather than another type of repair, or even roof replacement. One is the ease of application – applying a new coat of liquid roof product is far simpler than other options. It’s also faster, and much more cost effective. With that being said, there are several different products on the market that do a similar job, but are not similar in terms of results, cost and other factors.

Choosing between the Products on the Market

When it comes to liquid roof products, there are several competing products on the market. One of those is liquid urethane, which offers excellent performance. However, it’s very costly, and requires multiple coats to provide the protection that you need. Another option is acrylic. It’s cheap and wildly available, offers good UV resistance, and only takes one coat.

RV Liquid Roof Coatings

RV Liquid Roof Coatings

However, ponding water can quickly cause it to peel up, leaving you without the protection that you need for your RV. Finally, there are EPDM-based liquid roof coatings. These are made from the same material as your original roof, and bond directly to it with just one coat. They’re completely waterproof from the second they are applied, and impervious to ponding.

Liquid Roof and Its Benefits

EPDM liquid coatings are available from a wide range of companies, but they all vary somewhat in terms of formulation. Liquid Roof is a leading product, offering a number of important advantages and benefits.

Faster Repair: One of the most important benefits of Liquid Roof is the fact that it requires just one coat. Simply spread it, roll it, and you’re done. It requires some curing time, but a single coat is all that’s necessary.

Less Cost: Because only a single coat is needed, and because just one gallon will cover up to 200-square feet, you’ll spend less on Liquid Roof than you will competing products.

Immediate Protection: Liquid Roof offers immediate water protection from the second it is applied. While it takes a few hours to dry to the touch, it is waterproof immediately. With that being said, exposure of uncured material to heavy rain may result in dimpling (but not water leaks).

As you can see, repairing your RV’s roof does not need to be a hassle. Liquid Roof offers the cost-effective, simple application that you need. Most RV owners can recoat their roof in just a matter of hours, making this an ideal way to spend a sunny Sunday afternoon, and eliminating the prospect of water damage from leaks.

6 Tips to Help You Choose the Right RV Roof Coating

Unless your RV is brand new, you can bet that the roof has started to degrade a bit. That’s natural – it’s exposed to harsh sunlight, freezing temperatures, rain, sleet, snow, salt and more. It also has to put up with the sheer forces created by driving. All of that takes a toll, and over time, your roof will degrade. The good news is that an RV roof coating can give your recreational vehicle a new lease on life, and an almost-new roof. How do you choose the right coating, though?

RV Liquid Roof Coatings

1. Check the Type of Roof

First things first – you need to check the type of roof your RV has. There’s a good chance that it will be made from EPDM rubber. If so, then you should use a rubber RV roof coating product. However, you might have a fiberglass roof (rare) or a roof made out of TPO (even rarer). Both of these can be repaired using EPDM roof coatings, but you will need to prime them first.

2. Check for Holes and Other Structural Damage

Most RV roof leaks stem from age-related deterioration. However, some of them stem from physical damage. Falling branches from trees that you park under are the prime source of this type of damage, but there are others. Any structural damage must be repaired before you apply any type of RV roof coating.

3. Check the Flexibility of the Cured Product

Before buying any type of RV roof coating, check to determine how flexible it will be once applied and cured. Remember that your RV’s roof must deal with stresses that are not found with other types of roofs, such as the sheering forces that come with going around curves. This means that roofs must be very flexible, and yet strong enough to resist wind and rain. Not all RV roof coating products are up to this task.

4. Verify How Long for Full Waterproofing

Unless you are lucky enough to own a business that services RVs, you’re going to be applying the roof coating product outside, and it will need to remain outside so that it can dry and cure. The problem here is that some products can take a very long time to become waterproof. What happens if a sudden thunderstorm comes up? It could ruin all your hard work. The right coating product will be waterproof from the moment it’s applied to the roof, ensuring robust protection.

5. Verify the Number of Coats Needed

The right RV roof coating product can be applied with just a single coat. Many products on the market require at least two, if not more coats. What’s more, there are many products that require you wait a number of hours between applying the coats. This just increases the time you have to spend working on the RV. Choose a product with single application capability.

6. Verify the Tools Needed to Apply the RV Roof Coating

Finally, make sure you know what tools will be needed to apply the coating. Some products can be applied using little more than a squeegee and a paint roller, while others may require specialty tools for proper installation. The fewer tools you need to purchase for this project, the better.

With the tips we’ve provided, you should be able to find an RV roof coating that fits your needs, that can be applied quickly and with a minimum of fuss, that offers instant waterproofing, and that still manages to deliver the flexibility and strength needed by RV roofs.

Understanding Your Options When It Comes to RV Roof Coatings

The most common type of roof used for RVs today is rubber – aluminum and fiberglass roofs do exist, but they’re rare and becoming rarer. There are quite a few reasons for this, including rubber’s affordability, durability and weather resistance. However, you will need to reseal your rubber roof over time. There are several different RV roof coatings on the market that can do the job, but they’re not all created equal. Knowing the differences between these products will help you make a more informed decision.


At the bottom of the list in terms of both price and performance, we find acrylic. It’s relatively affordable, and easy to apply. However, it does not hold up the same as the three options we discuss below. It is also susceptible to damage from ponding water. Even a small area where water stands will eventually suffer from cracking and peeling, allowing water to leak under the rest of the coating, and even into the RV. Acrylic should be avoided if at all possible because of these issues.


Silicone offers much better protection than acrylic, and it is UV resistant, as well. It is not susceptible to ponding water, either. However, it is the most expensive option out there. It also collects dirt and debris, and can also suffer from mold and mildew growth. This can make cleaning it very difficult. Finally, you cannot use any other material to coat over silicone – it will only adhere to silicon RV roof coatings.


Urethane is less expensive than silicone, but better performing than acrylic. It offers UV resistance and heat reflectivity to keep your RV cooler during the summer months, and the material is actually pretty durable, to boot. However, it does not last as long as some products, and the strong odor during installation can be an issue, particularly for those with breathing issues. It also requires two coats to seal completely, which adds time and complexity to your project.


Finally, we have EPDM liquid rubber (ethylene propylene diene monomer). This is a synthetic rubber material that offers much better wear resistance than natural rubber. It is also highly UV resistant, and goes on with just a single coat. Unlike other options we’ve discussed in our list of RV roof coatings, EPDM products (like RV Liquid Roof) are waterproof on application, and while they do require time to fully cure, will protect your roof from the second they are applied with no wait time for them to become waterproof.

How to Tell If You Need to Reapply a Roof Coating

Now that we’ve discussed some of the available RV roof coatings and seen that EPDM is the better option, we need to talk about how to determine if you need to reapply that coating in the first place.

There are some obvious signs that you can watch for, such as holes punched through the roof by falling branches. If you notice water leaking within your RV, or discolorations on the ceiling or walls that indicate a water leak, you definitely need to take immediate action. Other signs that your RV’s roof is aging and in need of a bit of care include seams that are pulling apart, caulking around flashing and vents pulling away and the like.

Ultimately, the best option is to take a proactive stance toward roof maintenance. Inspect your roof periodically – once or twice per year – for signs of wear and tear, or damage. Keep an eye out inside for signs of water leaks, too. Then, make sure you use high quality roof coatings to reseal and recondition that roof.

What You Need to Know About Liquid Roof Repair Coatings

An RV is a large investment. You naturally want to get as many years of use out of your RV as possible, and that means that you want to take proper care of it. This goes far beyond just getting your oil changed regularly and making sure that you have quality tires on the vehicle for trips. You also need to make sure that you are taking proper care of the roof. In fact, if the roof were to start leaking, it could cause massive damage to the RV that would likely cost many thousands of dollars to repair properly.

Fortunately, there is an easy way to repair the roof and to keep it in great shape, when you utilize Liquid Roof repair coatings for the vehicle. The following are some of the most important facts that you need to understand if you have been considering these coatings for your RV.

What Are the Benefits?

First, you want to make sure that you understand all of the advantages that this type of coating can provide for your vehicle. This will provide your RV with an added barrier that acts as protection from the rain and water that gets onto your roof. It is a quality rubber coating that ensures your vehicle will not have leaks. The coating is highly durable and long-lasting. In fact, it has been shown to last for decades without any problems, meaning the coating could even last longer than the rest of the RV.

This is an environmentally safe product, and it can provide resistance to UV rays that might normally damage the roof. In addition, because it is white, it will help to reflect the sun and keep the interior of the RV cooler.

If you already have leaks in the RV, this can help to get rid of them. Even if you do not have any leaks, you will want to use the Liquid Roof repair coatings as a preventative measure. From the moment that you put the coating on the roof, it is waterproof. This is true even before it fully cures.

You Can Apply It on Your Own

One of the other important things to note about these coatings is that you will not need to have a professional apply it for you. Instead, you can do it all on your own if you choose, and it is very simple to do. Just clean off the top of the roof thoroughly, removing all of the debris and dirt, and then you can use a roller and a squeegee to apply the coating. It goes on just like paint, and you only need to add a single coat for the protection. If you have vents and a skylight, you will want to use a smaller brush to get around those areas.

It is possible to apply the Liquid Roof repair coatings in any temperature. However, it is important to remember that it is only going to cure when the temperatures are at least 55 degrees Fahrenheit or above. It will typically fully cure within just a couple of days. Check the weather before you apply the coating and choose a time when there are a couple days of nice weather and sunshine for the fastest curing times. Naturally, late spring and the summer tend to be the best times to do this.

Now that you know more about these Liquid Roof repair coatings, it is time that you got started with coatings for your own RV. The sooner you take this step the sooner your vehicle will have the protection that it needs.

Why Is Liquid Roof a Great Choice for Your RV?

When you have an RV, you know that you want to keep it in great shape, and that means having a roof coating that can withstand the elements, especially water. Having a leak in the RV is no fun, and it can cause some massive problems, such as rotting walls and floors, and the proliferation of mold. Therefore, you want to use a high-quality product, such as Liquid Roof, which can help to provide you with the protection that you truly need.

It Provides You With Preventative Protection for the RV Roof

Why does this product provide you with protection? It is an EPDM liquid that will adhere to nearly any type of surface, for starters. This is going to create a barrier for your roof that will keep it safe from water that might otherwise find it’s way into your RV. It can provide fast repairs for small leaks, and it will go right over patches, covering them up, and providing you with the barrier you need from the water. Unlike some of the other lesser coating options, Liquid Roof can even stand up to ponding water with no problems.

You will also find that this is a highly durable type of coating that will last for years without any worry. It is flexible enough that it is not going to be damaged in extreme temperatures. In fact, it works perfectly whether the roof is 100 degrees F or -40 F. It will keep on working and looking great.

Application Is Simple

Another one of the reasons this is such a solid choice for your RV is the fact that it is so easy to apply. Liquid Roof is a true DIY product. Clean off the roof thoroughly, and then just follow the instructions from the manufacturer. You can apply it just like paint with a roller and a brush for some of the edge work.

Apply the product in any temperature without a problem. Just remember that the temperature needs to be at least 55 degrees F for it to cure. It will usually only take a couple of days to cure properly.

Instant Waterproofing

When you apply the Liquid Roof, one of the other big advantages is that it will provide waterproofing protection instantly. Even if it were to rain the same day, it is still going to be waterproof. It just means that it is going to take longer to cure. Ideally, you will want to wait until you have a couple of sunny days in a row before you apply the coating to the roof.

Your RV Will Be Cooler

One of the benefits that many people never even consider when it comes to Liquid Roof is the fact that it goes on white. This means that it will be reflecting quite a bit of the sunlight, thus keeping the temperatures in the RV lower than they would be if you were to have a darker colored roof. This is going to be quite helpful if you are traveling through or to hot areas on your vacation.

Even when you have Liquid Roof on your RV, you will want to make it a point to get up onto the roof and inspect it a couple of times each year. You want to make sure that falling branches and other debris has not caused any damage to the roof. It is easy to see why this is such a popular product for RV owners. Get your Liquid Roof coating onto your RV today and have years of peace of mind.

Tips for Applying Cool Roof Coatings to Your RV

Whether you’re a DIY warrior with an RV, or a contractor who is trying out RV roof coatings for the first time, you’re in luck; cool roof coatings for RVs are easy to apply and don’t take many special skills or tools. In fact, the basic technique is a lot like applying a coat of paint to a wall. Roof coatings for RVs can not only help to keep the RV cool, but can also help protect the roof from damage and make the roof last longer.

In order to get these benefits from a cool roof coating for your RV, there are a few tips to keep in mind for the installation. First, be sure that you can safely transport materials to the roof. Liquid roof coating buckets usually weigh over 60 pounds, so be sure you can lift them up to the roof before committing to the job. You may need to separate the product into smaller containers to make it easier.

Inspect Before You Start

Our first tip is to inspect the roof before you apply cool roof coatings. You’ll want to look for existing tears or blisters, or open seams. Be careful to look around the skylight or vents for tears or any exposed foam. Serious issues must be addressed and repaired before applying this protective coating.

Check the Weather Before You Start

Most cool roof coatings for RVs need at least two days of dry, sunny weather to set properly. Be sure you check for a weekend where the weather won’t be getting too cold at night, and where no rain is imminent. You’ll want to give every single coat of protective covering a full two days to dry, so if you intend to do multiple coats, you need to watch the weather even closer.

Be Sure to Apply Thickly and Quickly

It’s best to apply liquid roof covering quickly so that it does not begin to dry before you have a chance to smooth it out. But as you are applying it, be sure that you are doing an evenly thick coat. One heavy coat can be all that you need to protect your roof. A dry coat that is 10mm thick is a job well done. If you can’t achieve this, two thin layers is just fine. Work directly from the pail, dipping your paint roller into the pail, and then spreading onto the roof. Or you can pour the product onto the roof and spread from there if the weather is cool enough. Don’t do this if the weather is hot, because the pool of product will dry too quickly.

Stand Back and Admire Your Work

Cool roof coatings for your RV are the perfect way to ensure that your home on wheels will be in great shape for decades. And once you get this coating applied, you don’t have to worry about a lot of maintenance. Take your time to do this step right, and you can enjoy years of peace when it comes to your RV roof.

4 Tips for Applying RV Roof Coating When You Have a Leak

One thing that RV owners are often surprised to learn is just how delicate an RV roof can be. Whether you have a rubber, metal, or polymer roof, there are many ways that this surface can be damaged. From falling tree limbs to temperature fluctuations, it doesn’t take much to get a leak. Many RV owners turn to RV roof coating like liquid EPDM to protect their roofs from leaks in the first place. But if you already have a leak, a protective RV roof coating is still a good idea. Here’s a few tips for applying a protective coating when the leak has already formed.

Find the Leak and the Cause

The first thing to do before you try to apply the RV roof coating is to find the leak, and identify what caused it. If it’s something like “a tree limb poked a hole through the rubber roof”, then you know you’ll need to patch the hole first. But it could be something subtler. For example, you may have a leak where the caulk sealant around the skylight or a vent has worn away. In this case, you’ll need to fix that seal before you can put down the roof coating.

Don’t Try to Fix Bubbles

When you are inspecting your RV roof for leaks, you’ll likely see a few bubbles here and there in the RV roof material. Believe it or not, these are pretty normal, and shouldn’t be thought of as defects. As long as there are no holes in your roof, the bubbles won’t affect how well the RV roof coating is applied. Trying to cut out a bubble or fix it will likely just make more problems. Most of the time, these go away on their own.

Know When a Leak is Too Big to Handle

Most RV owners are pretty handy with the DIY fixes. You have to be when you’re on the road with a big piece of machinery all by yourself. But there are some times when an RV roof leak is too big for a simple patch or re-caulking. If the hole is a major one that is causing a very big leak, you may need to take more drastic measures. The roof may need to be replaced, or repaired by professionals. You can put down the RV roof coating for protection on the newly repaired roof later.

Choose the Right RV Roof Coating

The final tip is to make sure you choose a roof coating that is made for RVs. It’s important that this product be liquid EPDM, which is specifically made to withstand the environmental concerns that plague RVs.

Repairing an RV leak in the roof isn’t all that hard. You can do it on your own if the leak is minor, and once you apply that RV roof coating, you won’t have to worry about it again for another decade! Just get your repair done before the leak becomes a major problem.